Tag Archives: Print Unable 36 error in Brother Printer

27Feb/17
Error Code 36 in Brother Printer

How to Resolve Brother Printer Error Code 36?

Error Code 36 error in Brother Printer occurs due to technical trouble in the printer. This is a technical error that stops the printer while performing a printing job. It mostly appears in the brother printer. Brother Printer is believed to provide the best quality print but with a technical error, it is impossible. The technical error needs to be driven away or it can stop the printing. It is important to look after the maintenance of the printer or the quality can get damaged. Often brother printers may have problems that may occur in the form of multiple error messages. Another such message is the 36 warning of failure. This may result in the printer producing noise along with an error message “Unable to print, see User’s Guide for troubleshooting and general maintenance.” Your printing job may be terminated with this error message and is called your Brother Printer error 36.

Brother Printer Error Code 36

Print Unable 36 error occurs in Brother Printer due to the printer’s technical problem. This is a technical error that prevents the printer from doing a printing job. It appears mostly in the printer of the son. Brother Printer is thought to provide the highest print quality, but it is difficult with a technical error. It is necessary to drive away the technical error or it can stop the printing. It’s all there.

Generally Causes of the Print Unable 36 error occurs in Brother Printer:

The Print Unable 36 error is related to the HVPS PCB failure during standby. The best thing to do is to turn the machine off and unplug everything from the back. Let the machine sit 20 to 30 minutes then try again. Next would be to check all your connections. Go through the machine and make sure everything is plugged in the way it should be, especially the HVPS and make sure none of the Drum contacts are bent or out of place. Technical errors are common and can occur because of miscommunication and the printer’s lack of maintenance. Brother Printer happens with a lot of technical mistakes and one of them is Print Unable 36, which creates a lot of disruption. This technical error in the middle prevents the flow of printing. This happens because of malfunctions in the printing system that need to be reduced.

Resolve Error code 36 in Brother Printer :

  • Replace Damaged Parts
  • Remove Paper and Restart

Replace Damaged Parts

  • You can easily resolve the error code 36 by replacing the damaged parts in the Brother printer.
  • It is essential for you to replace the carriage unit, head, carriage PCB, and carriage motor, if you want to fix the error code 36.
  • Require the power supply PCB replacing if it is destroyed.

Remove Paper and Restart

  • After receiving the error code, you require to open the printer to inspect its inner components.
  • View various pieces of papers stuck inside the printer
  • open various printer covers such as front, paper tray, back and many more.
  • Fix the issue by removing these papers and the next step is to restart the printer.
  • Need to carefully read the installation manual of the printer and if necessary get help from a reliable and trusted technical support service provider.

Method 1:

  • Firstly, you will have to switch off the printing device.
  • Now, you will have to wait to let the printer turn off and become stable.
  • Let the printer device to rest for some time and cool off.
  • Turn on the printing device and wait until it reaches in its position.
  • When the printer gets into the ready position, you will have to try to take a test print by pressing the MENU, 6, 4 and Start.

Method 2:

  • Open up the printer access door when you turn off the printer completely.
  • After this, you will have to take off the drum and the toner cartridge from the printing device.
  • Now, you will have to close the printer access door.
  • Next, you will have to turn on the printing device and make it ready.
  • Check out for the technical error to get dismissed.
  • Once the error message gets disappeared you will have to turn off the printing device one more time.
  • Again, you will have to open up the printer access door.
  • Now, you will have to install the drum and the toner cartridge into its position.
  • You will have to remember to check out the drum and the toner cartridge as there can be damaged within the parts.
  • If any damage occurs within the parts, you will need to replace the parts with a new one immediately.
  • Once the parts get verified you can carry up to installation part.
  • Install the parts in a careful and then close the printer access door.
  • Now you will have to turn on the printing device and wait till the printer gets reached into its ready position.
  • Check out the technical error message and the absence of the message to appear, carry out a simple test.
  • Move into the User Settings List and then press on the MENU followed by pressing 6,4, and START.
  • Take a test print and make sure the error gets removed.

How To Fix Error Code 36 For Mac

Error Code 36 is somewhat of a rare error that some Mac users experience. It occurs when you are trying to copy a file which I will get into later, as well as show you how to fix it. So, if you are getting this error and have no idea what to do, or if you just want to learn for later, stay here because this article has everything you need to know about this error code.

What Causes error code 36?

Unfortunately, it’s not very clear exactly what causes this error to happen. I’m sure that if you had an extensive background in computer science you would be able to figure it out as it is a complicated issue that, most simply put, has to do with the directory of the files and their proper location.

Luckily for you, unlike many error codes, there’s no need to diagnosis what is causing it, as the solution is the same regardless. This is nice as it’s one less thing you have to worry about.

  1. he first thing that you need to do is open up the terminal on your Mac. if you’ve never heard of that or don’t know how to do it, fear not because it’s a really simple task to perform. We actually already have an article on it here that gives you step by step instructions.
  2. Once you have successfully opened the terminal, type dot_clean into the first line.
  3. Drag whatever folder is giving you issues to the terminal window.
  4. Once you drop the folder into the terminal, the path of the particular file will appear in the terminal windows at the end of the command. You can ignore this, as you probably won’t know what it means. It simply is just showing you the exact location of the folder. Just don’t be confused when you see a long line of coding language.
  5. All you need to do from here is click the Enter button on your keyboard and then close terminal.
  6. Test out to see if it corrected the issue by trying to copy the file to several locations on your Mac.

Why You Should Call Us?

Dial our toll-free Brother Printer Repair Service number +1-855-847-1975 for quick online assistance for resolving technical issues relating to the brother printers.