Tag Archives: Brother Printer Errors

27Jun/19

List of 101 Brother Printer Errors Code: Find it & Fix it

If your Brother Laser printer, fax machine or all-in – one printer is clogged in the workplace then an error message will likely be displayed. These error messages are there to help you solve the fault of your Brother Machine and to help you solve the problems.

Using the term ‘ mistake,” error code’ or’ machine error’ followed by an action (e.g.’ Replace Laser Unit’) or an alphanumeric code, all Brother printers, fax machines and all-in-one error messages appear on your screen. By searching the relevant description in the user manual, the alphanumeric code is used.

Keeping this problem in mind, with a description of what they mean and what to do, we mentioned the most prevalent Brother Error codes.

Putting together 101 common Brother Printer Errors, Fax & All-in-One Error Codes

Pick out yours & resolve it quickly

  • Error#1 to Error#22 specified just for Printers”> Error#1 to Error#22 specified just for Printers
  • Error#23 to Error#66 specified for Multi-Functional Printers
  • Error#67 to Error#101 specified for Fax Machine

Resolution of 101 common Brother Printer Errors, Fax & All-in-One Error Codes

Error#1- Brother Printer Error E50

Explanation: The fuser unit is a part in the machine that acquires heat to connect the print to the paper. Due to Malfunctioning of fuser unit, the printer has detected that there is an issue with the temperature, either it is too hot or not heating up enough.

Solution: Switch-off the machine for 5 minutes and then get back on again. Leave the machine uninterrupted for 10 minutes and it may recover. If the fault still persists, the fuser unit needs to be replaced.

Error#2- Brother Printer Error E51

Explanation: The laser unit is a part of the printer that writes the information on the drum surface. Due to malfunctioning of laser unit, the error code means that the laser beam is not being detected.

Solution: Switch your printer off and back on again. If the error still persists then the laser safety flap may be defective or the laser unit need to be replaced.

Error#3- Brother Printer Error E52

Explanation: Malfunction of laser motor: The laser unit is the part of the printer that writes the information against the surface of the drum. Inside the laser unit, there is a spinning mirror and the motor that drives it is faulty.

Solution: Switch your printer off and back on again. If the error still persists then the laser unit need to be replaced.

Error#4- Brother Printer Error Error E54

Explanation: Fault in main motor: The main motor drives the main gear train, which in turn drives all the printing functions, and the printer has detected a malfunctioning in this motor.

Solution: Switch the printer off and back on again. If the error still persists attempt turning operation on the printer without the toner unit in it and check if the motor turns. If it does then replace the toner unit but if errors till persists, then the main motor need to be replaced.

Error#5- Brother Printer Error Error E60

Explanation: Malfunctioning of fan: There are four cooling fans in the printer and a fault has been detected in one of them.

Solution: Switch your printer off and back on again. If the error still persists, then you need an engineer to examine which fan is faulty and need a replacement.

Error#6- Brother Printer Error Replace PF Kit

Explanation: This error indicates that the paper pick-up rollers and separation pads have reached the end of their expected life cycle.

Solution: When the paper feed kit needs replacement, the printer may start experiencing paper jams. In this case, you need an engineer to replace it.

Error#7- Brother Printer Error Replace Fuser Unit

Explanation: This error indicates that the fuser unit has reached the end of its expected life cycle.

Solution: When the fuser unit get damaged, the printer can cause poor quality print and paper jams. In this case, you need an engineer to replace the fuser unit.

Error#8- Brother Printer Error Replace Laser Unit

Explanation: This error indicates that the laser unit has reached the end of its expected life cycle.

Solution: When the laser unit has worn out, it can cause a deterioration in print quality of the printer. In this case, you need an engineer to replace the laser unit.

Error#9- Brother Printer Error Clean Drum Unit

Explanation: This error indicates that the printer has detected dust or loose toner around the drum unit.

Solution: Eliminate toner unit and clean-off the dust or toner from the unit. Look at the blue tab in the front of the drum unit, slide this from all its adjacent side making sure to return it to its’ home position and reinsert it into the machine. If error message still persists then, replace the drum unit.

Error#10- Brother Printer Error Code: 20, 21, 22, 23

Explanation: Laser Diode Failure: The laser diodes writes the information to be printed onto the surfaces of the drum. Due to Laser Diode Failure, one of them is malfunctioning.

Solution: Switch your machine off and back on again. If the error message still persists the laser unit need to be replaced.

Error#11- Brother Printer Error Code 31

Explanation: Density sensor failure: The print density is examined by a sensor which observes the samples of toner placed on the belt.

Solution: Switch your machine off and back on again. If the error code still persists you need an engineer to determine if the sensor or belt is faulty.

Error#12- Brother Printer Error Code 32

Explanation: Density sensor shutter failure

Solution: The density sensor has a protective shutter to keep dust and loose toner off it. This has turned defective and you need an engineer to rectify this error.

Error#13- Brother Printer Error Code: 50

Explanation: Replace Drum Unit: The drum unit has reached the end of its life cycle. It has printed the amount of pages specified in its life cycle.

Solution: The drum unit needs replacement and the drum life requires counter resetting.

Error#14- Brother Printer Error Code: 51

Explanation: Replace MP tray feed kit: The feed roller and retard pad for the manual feed tray have touched the end of their life cycle.

Solution: You may have encountered with some paper feed problems from the MP tray. This is because the feed roller kit needs replacement and the counter requires resetting.

Error#15- Brother Printer Error Code: 52

Explanation: Replace Tray 1 Feed Kit: The feed roller and retard pad for the main paper tray has reached to the end of its life cycle.

Solution: Tattered rollers can cause feed issues and paper jams. The tray 1 paper feed kit needs replacement and the counter resetting.

Error#16 Brother Printer Error Code: 54

Explanation: Replace fuser unit: The fuser unit has touched the end of its life cycle.

Solution: Worn fuser units can result in poor quality print or paper jams. The fuser unit needs replacement and the counter resetting.

Error#17- Brother Printer Error Code 55

Explanation: Replace laser unit: The laser unit has completed its life cycle.

Solution: Damaged laser units can cause low quality print. The laser unit needs replacement and the counter resetting.

Error#18- Brother Printer Error Code 57

Explanation: Paper Jam in the Duplex Unit: The printer has encountered with paper jam issue while double sided printing.

Solution: Check for paper in the duplex unit and eliminate it. If error still persists, the rollers in the duplex unit needs replacement or the duplex switch solenoid may be faulty.

Error#19- Brother Printer Error Code: 5E

Explanation: Replace the belt unit: The transfer belt has touched the end of its life cycle.

Solution: Dilapidated transfer belts are the root cause of poor quality print and paper jams. The belt must be replaced before ending the counter reset.

Error#20- Brother Printer Error Code: 68, 69, 6A, 6B, 6C, 6D, 6E, 6F

Explanation: Fuser Unit Failure: These all codes are applied to the fuser unit. The main issue which persists with Fuser Unit is too hot, not hot enough, not heating up at all.

Solution: Switch your printer off and back on again. If the error message still persists, the fuser unit needs replacement.

Error#21- Brother Printer Error Code: 7D

Explanation: Dirt on the Drum Unit: The printer has detected that there is dust in the drum area of the machine.

Solution: Follow the drum area cleaning method. If the error still persists then you need an engineer to fix in-depth cleaning.

Error#22 Brother Printer Error Code: CF

Explanation: Waste Toner Box Full: The machine generates some quantity of waste toner while printing. This is collected together in a container which is now jam-packed.

Solution: Go through the waste toner box replacement, if the error still indicates that the new box is full, the waste toner sensor may be faulty.

MULTI-FUNCTIONAL PRINTERS

Error#23- Brother Printer Error 57

Explanation: Duplex Error: An error has been encountered while printing a double sided document.

Solution: Check for wreckage or torn paper in the duplex unit. If anything is not found, the duplex unit needs servicing.

Error#24- Brother Printer Error 59

Explanation: Fuser error: The fuser unit is the part of the machine that acquires heat and bonds the printer toner against the paper and the printer is detecting an issue with the temperature.

Solution: Switch your printer off and back on again. If the error still persists then the fuser needs replacement.

Error#25- Brother Printer Error 60

Explanation: Eject Tray Error: The eject tray has a sensor which communicate it when the tray is full of printed documents.

Solution: Take out the paper from exit tray. If the error still persists, the eject sensor need replacement.

Error#26- Brother Printer Error 68

Explanation: Fuser error: The fuser unit is the part of the machine that acquires heat and bonds the print against the page and the machine is indicating a temperature issue.

Solution: Switch your machine off and back on again. If the error still persists then the fuser unit will needs replacement.

Error#27- Brother Printer Error 69

Explanation: Fuser error: The fuser unit is the part of the machine that acquires heat and bonds the print against the page and an issue with the temperature is being detected.

Solution: Switch your machine off and back on again. If the error still persists then the fuser assembly needs replacement.

Error#28- Brother Printer Error 6E

Explanation: Fuser error: The fuser unit is the part of the machine that acquires heat and bonds the print against the page and the machine is detecting heat issues.

Solution: Switch your machine off and back on again. If the error still persists then the fuser needs replacement.

Error#29- Brother Printer Error 71

Explanation: Laser Error: The laser unit is the part of the machine that writes the information against the surface of the drum and the machine is detecting an issue with it. This also connects to the scanner motor.

Solution: Switch your machine off and back on again. If the issue still persists then the laser needs replacement.

Error#30- Brother Printer Error 72

Explanation: Laser Error: The laser unit is the part of the machine that writes the information against the surface of the drum and is not identifying the Beam Detect signal.

Solution: Switch your machine off and back on again. If the error still persists then the laser needs replacement.

Error#31- Brother Printer Error 74

Explanation: Toner Error: The machine is detecting that it is out of toner.

Solution: Switch to replace the toner unit. If the error still persists then the toner sensor may be faulty.

Error#32- Brother Printer Error 76

Explanation: Fuser error: The fuser unit is the part of the machine that acquires heat and bonds the print against the page and the printer is detecting an issue with the temperature.

Solution: Switch your machine off and back on again. If the error still continues then the fuser needs replacement.

Error#33- Brother Printer Error 78

Explanation: Fuser error: The fuser unit is the part of the machine that acquires heat and repairs the print against the page and the machine is identifying an issue with the temperature.

Solution: Switch your machine off and back on again. If the error still persists, then the fuser unit needs replacement.

Error#34- Brother Printer Error 83

Explanation: Paper Feed Error: The paper sensor has detected a paper jam in the machine.

Solution: Check the paper path for debris or torn paper, remove cautiously if anything found. If nothing is found, then there may be an issue with the paper sensors.

Error#35- Brother Printer Error 84

Explanation: Paper Feed Error: A paper jam has been detected in the body of your machine.

Solution: Check if the paper path is clear of obstacles. If nothing is found, then there may be an issue with the paper sensors.

Error#36- Brother Printer Error 88

Explanation: Paper Feed Error: Your machine is detecting a paper jam in the recording paper path.

Solution: Check paper path for wreckage or torn paper. If nothing is found, then there may be an issue in the paper sensors.

Error#37- Brother Printer Error Code test: 20, 21, 22, 23

Explanation: Laser Diode Failure: The laser diodes write the information to be printed against the drum surface. One of these has turned faulty.

Solution: Switch your machine off and back on again. If the error message still persists, the laser unit needs replacement.

Error#38- Brother Printer Error Code: 31

Explanation: Density Sensor Failure: The print density is tested by a sensor looking at samples of toner on the belt. The sensor is detecting an issue.

Solution: Switch the machine off and back on again. If the error message still persists then, you need an engineer to check whether the sensor or the belt is malfunctioning.

Error#39- Brother Printer Error Code: 32

Explanation: Density Sensor Shutter Failure: The density sensor has a protective shield that is functioned by a solenoid. This has turned defective.

Solution: Switch your machine off and back on again. If the error code still persists then, you need an engineer to rectify this error.

Error#40- Brother Printer Error Code: 50

Explanation: Replace Drum Unit: The drum unit has end up by printing the specified number of pages in its life cycle.

Solution: Worn out drum units affect the print quality. The drum unit needs replacement and the life counter resetting.

Error#41- Brother Printer Error Code: 51

Explanation: Replace MP Tray feed kit: The feed roller and retard pad for the manual feed tray have touched the end of their defined life cycle.

Solution: Worn rollers are the cause of paper feed issues and jams. The MP tray roller kit needs to be replaced and the life counter resetting.

Error#42- Brother Printer Error Code: 52

Explanation: Replace Tray 1 Feed Kit: The feed rollers and retard pad for the main paper tray have reached the end of their specified life cycle.

Solution: Dilapidated rollers can cause paper feed issues and jams. The feed roller kit needs replacement and the life counter resetting.

Error#43- Brother Printer Error Code: 54

Explanation: Replace Fuser Unit: The fuser unit has come to an end of its specified life cycle.

Solution: Tattered fuser units can cause low quality print and paper jams. The fuser unit needs replacement and life counter resetting.

Error#44- Brother Printer Error Code: 55

Explanation: Replace Laser Unit: The laser unit has touched the end of its specified life cycle.

Solution: Worn-out laser units can results in poor print quality and printer failure. The laser unit needs replacement and the life counter resetting.

Error#45- Brother Printer Error Code: 57

Explanation: Paper Jam in Duplex: A paper jam has issue has been encountered in the unit that fits the page for double sided printing.

Solution: Check for paper in the duplex unit and carefully eradicate if there is any. If the issue still persists then, the duplex unit needs servicing.

Error#46- Brother Printer Error Code: 5E

Explanation: Replace the Belt Unit: The transfer belt has reached the end of its specified life cycle.

Solution: Worn out or torn transfer belts can cause low quality print and paper jams. The belt needs replacement and the life counter resetting.

Error#47- Brother Printer Error Code: 68, 69, 6A, 6B, 6C, 6D, 6E, 6F

Explanation: Fuser Unit Failure: All these codes are applied to the fuser unit. The major issue in this error code is too hot, not hot enough or not heating up at all.

Solution: Switch your printer off and back on again. If the error code still persists, the fuser unit will needs replacement.

Error#48- Brother Printer Error Code: 7D

Explanation: Dirt on Drum Unit: The printer is identifying contamination in the drum unit area.

Solution: clean drum area, if the error code still persists then, an engineer will be required to for more assistance in-depth cleaning.

Error#49- Brother Printer Error Code: CF

Explanation: Waste Toner Box Full: The printer creates some quantity of waste toner while printing. This waste toner is collected together in a waste toner unit which is now jam-packed.

Solution: Replace waste toner box. If the error code still persists, then the waste toner sensor may be faulty.

Error#50- Brother Printer Error Code: A2

Explanation: Sending Document is too long: While you are sending a fax, the document sensors have detected that the outgoing fax is exceeding the limit.

Solution: Check that the document is not skidding in the reader section of the machine. If yes, then the feed rollers and separation pad needs replacement.

Error#51- Brother Printer Error Code: A3

Explanation: Sending Document Jam: while you are sending a fax, the machine has encountered with a jam in the document feeder area.

Solution: Check for any wreckage in the document feeder area. If nothing is found, the feed rollers or document sensors may be defective.

Error#52- Brother Printer Error Code: A5

Explanation: Scanning Error: When a fax is being sent the machine detects an error with the scanning unit.

Solution: Switch your machine off and back on again. If the error code still persists, then the scanner unit needs replacement.

Error#53- Brother Printer Error Code: B9

Explanation: Scanning Light Error: When your document is being scanned the machine detects an issue in the scanner unit light.

Solution: Switch your machine off and back on again. If the scan lamp does not come on, then the scanner unit needs replacement.

Error#54- Brother Printer Machine Error: 30, 31, 32, 33, 34, 35, 36, 37, 38

Explanation: Carriage Unit Travel Errors: Your machine is detecting an error with the movement of the print head.

Solution: Check for obstacles in the print head area. If nothing is found, an engineer will be required to examine the cause.

Error#55- Brother Printer Machine Error: 41

Explanation: Print head Error: Your machine has detected an issue with the functioning of the print head.

Solution: An engineer will be necessarily required to replace the faulty print head.

Error#56- Brother Printer Machine Error: 46

Explanation: Waste Ink Error: The machine yields a quantity of waste ink at the time of printing and cleaning. This is collected together in a waste ink tank which has now become chock-full.

Solution: Certainly, an engineer will be required to replace the waste ink box & reset the waste ink counter.

Error#57- Brother Printer Machine Error: 50, 51, 52

Explanation: Purge Unit Error: The purge unit is used in cleaning and leading the print head. The machine has detected an issue in this unit.

Solution: An engineer will be needed to replace the faulty purge unit.

Error#58- Brother Printer Machine Error: 82

Explanation: Paper Feed Error: The machine has detected an error while attempting to feed the recording paper.

Solution: Take out paper tray and reset paper. Also look for wreckage in paper feed path. If the error still persists, then the paper pick-up rollers may require replacement or the paper path need cleaning.

Error#59- Brother Printer Machine Error: 83

Explanation: Paper Jam Error: The machine has detected that there is paper jam in the feed path.

Solution: Take out paper tray and check for jammed paper. Open the body of the printer and look for any jammed paper. If nothing is found, an engineer will be required to check the paper sensors.

Error#60- Brother Printer Machine Error: 84

Explanation: Paper Jam Error: The paper sensor has identified a paper jam in its feed path.

Solution: Eliminate paper tray and check for any paper in path. Open the body of the printer and check for jammed paper. If nothing is found, an engineer will be required to check the paper sensors.

Error#61- Brother Printer Machine Error: 88

Explanation: Paper Jam Error: Your machine has detected a paper jam in its feed path.

Solution: Remove the paper tray and check for any paper in path. Open the body of the printer and look for jammed paper. If nothing is found, then an engineer will be required to check the paper sensors.

Error#62- Brother Printer Machine Error: A2

Explanation: Document Jam: The machine has detected an issue using a page in the automatic document feeder.

Solution: Verify that the document is set properly on the feeder, and it is not skidding. Check path for obstacles and eradicate any there is any foreign particles. If the error still persists then the rollers and separation pad needs replacement.

Error#63- Brother Printer Machine Error: A3

Explanation: Document Jam: The machine has detected an issue with a page which is being sent by the document feeder.

Solution: Verify that the document is fixed correctly on the feeder, and it is not skidding. Check feeder path for blockage and eradicate any foreign particles. If the error still persists then the rollers and separation pad may needs replacement.

Error#64- Brother Printer Machine Error: A5

Explanation: Scanner Error: Scanner is a device that read out the outgoing documents and your machine is detecting an issue in this.

Solution: Switch your machine off and back on again. If the error code still persists then the scanner unit needs replacement.

Error#65- Brother Printer Machine Error: DF

Explanation: Modem Error: Modem is a device which is used to communicate or interconnect with other fax machines. While trying to send / receive a fax, an error has been detected.

Solution: Switch your machine off and back on again. If the error code still continues, then an engineer will be required to inspect the cause of it.

Error#66- Brother Printer Machine Error: 26. 27, 28, 29

Explanation: Ink Cartridge Detection Error: Your machine failed to detect one of the ink cartridges.

Solution: Switch to replace the ink cartridges. If the error code still persists, then the ink loader unit needs attention.

FAX MACHINE

Error#67- Brother Printer Machine Error: 71

Explanation: Polygon mirror error: Polygon mirror is a part of the laser unit. It rotates at high speed driven by its’ own motor. This motor may be malfunctioning.

Solution: Switch your machine off / on. If the fault still continues, the laser unit will needs replacement.

Error#68- Brother Printer Machine Error: 72

Explanation: Beam detect error: The laser unit yields a beam to write the information against the surface of the drum. Your machine has to failed detect this beam.

Solution: Switch your fax machine off and back on again. If the error still persists, then you need a new laser unit.

Error#69- Brother Printer Machine Error: 76

Explanation: Heater harness error: This fault relates to the fuser unit. This is the part of the machine that consumes high temperature to bond the print against the page. The machine is detecting an electrical issue in the fuser.

Solution: Switch your fax machine off and back on again. If the error still continues you require a new fuser unit.

Error#70- Brother Printer Machine Error: 78

Explanation: Heater thermistor error: A heater thermistor regulates the temperature of the fuser unit and the machine is detecting an issue in this.

Solution: Switch your fax machine off and back on again. If the fault still persists, then you require a new fuser unit.

Error#71- Brother Printer Machine Error: 7A

Explanation: Main motor error: Main motor is a device which controls all the chief components of the printer section of the Fax machine. An issue has been identified with the timing of the main motor drive.

Solution: Switch your fax machine off and back on again. If the fault still persists, then the main motor needs replacement.

Error#72- Brother Printer Machine Error: 7D

Explanation: Drum unit error: The Fax machine prints by means of a drum unit. The drum unit is supplied with a high voltage and a leakage has been detected.

Solution: Replace drum unit. If the error still persists, then the printer unit needs dusting and the contacts need to be checked.

Error#73- Brother Printer Machine Error: 82

Explanation: Paper feed error: The Fax machine has failed to pick up the paper from the paper tray.

Solution: Verify the quality of the paper and reset it in the paper tray. If the error still persists, then the pick-up rollers or solenoid needs replacement.

Error#74- Brother Printer Machine Error: 84

Explanation: Paper jam error: The Fax machine has identified paper jam issue in the paper path.

Solution: Take out the drum unit and check for any paper in the paper path. Remove any jammed paper cautiously so as not to tear it. If the error still persists, an engineer will be required to detect the cause.

Error#75- Brother Printer Machine Error: A2

Explanation: Sending document error: The Fax machine has detected an issue when you are trying to send your document. The document seems to be too long to be scanned.

Solution: Verify the send paper path for wreckage or debris and eliminate anything that is preventing the document from travelling smoothly. If the error still persists, then the document feed rollers or separation pad needs replacement.

Error#76- Brother Printer Machine Error: A3

Explanation: Sending document detect error: A document has been positioned on the Fax machine to be sent but the machine has not predicted that there is any document.

Solution: Rearrange the document on the feeder and check if it is now recognized. If no, then your paper sensor is faulty.

Error#77- Brother Printer Machine Error: A9

Explanation: Scanning error: A fault has been detected with the unit that reads the out-going information.

Solution: Switch your fax machine off and back on again. If the error still persists the scanner unit needs replacement.

Error#78- Brother Printer Machine Error: D5

Explanation: Communication error: While trying to send or receive a document, the Fax machine is detecting an error.

Solution: Verify that the machine is linked to a telephone line and that the line is live. If the error still persists, then the modem in the fax machine is malfunctioning.

Error#79- Brother Printer Machine Error: 85

Explanation: Ink Ribbon Error: The machine is detecting an issue with the ribbon used in printing documents.

Solution: Check ribbon is fitted properly and that it is not torn. If the error still persists, then an engineer will be needed to inspect the sensors.

Error#80- Brother Printer Machine Error: 8A

Explanation: Print head Error: The machine has detected fault in the thermal head which is used to print the information on the recording paper.

Solution: Verify the print head to check if anything is stuck to it. If nothing is found then the print head needs replacement.

Error#81- Brother Printer Machine Error: 8B

Explanation: Print head Error: The machine has identified that the thermal print head is overheating or heating excessively.

Solution: Switch your machine off and back on again. If the error code still continues, then the print head needs replacement.

Error#82- Brother Printer Machine Error: A2

Explanation: Document Feed Error: The machine has detected an issue while transmitting a document. It is sensing that the document is too long to be scanned.

Solution: Verify the document is not too long and that it is not skidding or being congested. If the error code still continues, then the document feed rollers needs replacement.

Error#83- Brother Printer Machine Error: A7

Explanation: Document Feed Error: Your machine has detected fault while transmitting a document. It is detecting that the time taken to scan the document is extreme.

Solution: Check if the document is not skidding in the document feed path, or there is no any obstruction in the path. If the error code still persists, then the document feed rollers needs replacement.

Error#84- Brother Printer Machine Error: B9

Explanation: Scanner Error: The scanner unit reads the information on the outgoing document and a malfunctioning with its light intensity is being detected.

Solution: Switch your machine off and back on again. If the error code still persists, then the scanner unit needs replacement.

Error#85- Brother Printer Machine Error: 8203

Explanation: Recording Paper Jam: The recording paper sensors are detecting paper in the paper path which has maximum chances of causing a jam.

Solution: Look at the paper path and slightly take way any trapped paper. If the error still follows, you will require an engineer to check the parts of the machine which are inaccessible.

Error#86- Brother Printer Machine Error: 8303

Explanation: Recording Paper Jam: The recording paper sensors are detecting paper blockage in the paper path.

Solution: Check the paper path and slightly remove any stuck paper. If the error still persists, then the paper sensors may be defective.

Error#87- Brother Printer Machine Error: 8809

Explanation: Recording Paper Jam: The paper sensor has spotted paper in the path before initiating the paper feed.

Solution: Verify the paper path and gently eliminate any if there is any blocked paper. If nothing is found in the paper path, then you need an engineer to check the sensors.

Error#88- Brother Printer Machine Error: 880B

Explanation: Recording Paper Jam: The paper registration sensor has detected paper in the path when the power is proceeding of the control panel assembly has been open/closed.

Solution: Look at the paper path and slightly take out if there is any trapped paper. If nothing is found in the paper path, then the paper sensors may be defective.

Error#89- Brother Printer Machine Error: 30, 31, 32, 33, 34, 35, 36, 37, 38

Explanation: Carriage Unit Travel Errors: The machine has detected an issue with the movement of the print head.

Solution: Check for any blockage or hindrances in the print head area. If nothing is found, an engineer will be required to examine the cause.

Error#90- Brother Printer Machine Error: 41

Explanation: Print head Error: The machine has detected fault in the functioning of the print head.

Solution: An engineer will be needed to replace the defective print head.

Error#91- Brother Printer Machine Error: 46

Explanation: Waste Ink Error: While printing and cleaning, the machine yields some quantity of waste ink which is collected together in a waste ink tank and this tank has become full.

Solution: An engineer will be needed to replace the waste ink box and reset and install the waste ink counter.

Error#92- Brother Printer Machine Error: 50, 51, 52

Explanation: Purge Unit Error: The purge unit is utilized in cleaning and leading the print head. The machine has detected an issue with this unit.

Solution: An engineer will be needed to replace the defective purge unit.

Error#93- Brother Printer Machine Error: 82

Explanation: Paper Feed Error: The machine has detected certain fault when you are trying to feed the recording paper.

Solution: Take out the paper tray and reset paper. Also check for debris or wreckage in the path of paper feed. If the error still persists, then the paper pick-up rollers needs replacement or the paper path requires dusting.

Error#94- Brother Printer Machine Error: 83

Explanation: Paper Jam Error: Your machine has retried to pull the paper but failed to do.

Solution: Eradicate the paper tray and check for jammed paper in the pathway. Open the body of the printer and check for jammed paper. If nothing is found, then you need an engineer to inspect the paper sensors.

Error#95- Brother Printer Machine Error: 84

Explanation: Paper Jam Error: The paper width detector or registration has indicated a paper jam.

Solution: Remove paper tray and check for paper in the path. Look for paper in the body of the printer. If nothing is found, then you need an engineer to examine the paper sensors.

Error#96- Brother Printer Machine Error: 88

Explanation: Paper Jam Error: The machine has noticed a paper jam in its feed path.

Solution: check for obstruction in the paper path. Open the body of the printer and look for jammed paper. If nothing is found you will require an engineer to determine the cause of fault in the paper sensors.

Error#97- Brother Printer Machine Error: A2

Explanation: Document Jam: Your machine has detected an issue with a page being sent through the document feeder, perhaps taking too long to scan.

Solution: verify that the document is set properly on the feeder, and it is not skidding. Check feed path and eradicate any foreign particles. If the error still persists, then the rollers and separation pad needs replacement.

Error#98- Brother Printer Machine Error: A3

Explanation: Document Jam: The machine has detected certain fault with a page being sent through the document feeder.

Solution: Check that the document is kept appropriately on the feeder, and it is not skidding. Check feeder path for barricades and eliminate any foreign particles. If the error still continues, then the rollers and separation pad needs replacement.

Error#99- Brother Printer Machine Error: A5

Explanation: Scanner Error: Scanner is a device that reads the outgoing documents and the machine is detecting a malfunction in this.

Solution: Switch your machine off and back on again. If the error code still persists, then the scanner unit need replacement.

Error#100- Brother Printer Machine Error: DF

Explanation: Modem Error: Modem is a device used to communicate with other fax machines. An error is being detected while trying to send / receive a fax.

Solution: Switch your machine off and back on again. If the error still continues, then an engineer will be needed to govern the cause of it.

Error#101- Brother Printer Machine Error: 26, 27, 28, 29

Explanation: Ink Cartridge Detection Error: The machine has failed to detect one of the ink cartridges.

Solution: Switch to replace the ink cartridges. If the error code still persists, then the ink loader unit needs consideration.

We’ve listed 101 biggest printer annoyances overhead, which we hope have proved to be beneficial to you.

Call For Printer Repair @ USA/CA : +1-800-910-1747 , UK : +44-808-164-5280 Right Now to Get Instant Help

12Jun/18

How to Solve Brother Printer not connected in control center?

Brother control center supports Windows 10, 8.1, 8, 7, Vista, XP software that gives you quick and easy access to many functions such as Scan, Photo Print and PC-FAX of your Brother machine directly from your computer screen, and lets you configure your machine’s settings easily. Brother Printers are pretty good to use for your office and home purposes. But none of the technical devices is flawless. So, you may also go through a few issues with your printing device. Problem with the control Centre of your printer is one of the common problems that you might come across frequently. Give us a call at our Brother PriterTech Support and Solve Brother Printer not connected in control center.

Here, we have provided a few solutions to fix your problem regarding the control Centre of your printer. Follow the steps mentioned below and get rid of the problem quickly.

How to download Brother Control Center 4 on your Windows device?

Brother control center 4 download windows 10 64 bit can be done easily by following the steps given below:
(Note: the steps are same for Brother Control Center 3 download)

  1. To begin the process, open your browser and navigate to the official website of Brother.
  2. Now, click on the “Downloads” option and go to the next option.
  3. After this, type the model number in the field that reads as “Search by Model Name”.
  4. Upon entering the model number, click on the “Search” button.
  5. Now, tap on “OS Family” and choose the type of your operating system.
  6. For selecting the OS version, tap on the specified version and then click on the “Search” option.
  7. Now locate “Brother Control Center” by tapping on the “+ show all” option.
  8. When the End-User License Agreement page appears on your screen, click on the “Agree” button.
  9. Now, tap on the “Download” option.
  10. You may find the downloaded file in the “Downloads” folder of your device after that you need to install it. The installation steps are given in the following section.

Steps to download Brother Control Center 4 on Mac

  1. Navigate to the official website of Brother and click on the “Downloads” option.
  2. Now, type in your model number and go to the next step.
  3. After locating your model name, click on the “OS family” option.
  4. Now choose the operating system for mac such as macOS 10, macOS 10.11, macOS 10.12, macOS 10.13, and macOS 10.14.
  5. In this step, you have to “Agree” to the End User License Agreement.
  6. This action will begin the downloading process on your Mac device.
  7. You will find the downloaded file in the “Dock” after which you have to install it.

If some problem occurs while downloading the Brother Control center, then you may contact Brother Support for fixing your issue.

Easy Fixes For Brother Control Center Error

Brother printers are quite popular for offering exclusive printing at an affordable cost. For personal and professional usage, these printing devices are pretty good to use. Despite having such wonderful qualities, you may often face few difficulties with the Brother control center. Resolving this issue is a bit difficult and time-consuming for a non-tech-savvy person.

  1. Scan – it has four (4) settings depending what specific task you require to do: Image, OCR, E-mail, File
  2. PC-Copy – enables you to copy a page then print copies of the scan. You can choose a color copy, monochrome copy, 2 in 1 copy, or 4 in 1 copy
  3. Photo – it opens PhotoCapture Center, another Brother application, to open, print, save, or copy images saved in your computer
  4. PC-FAX – it lets you send an image file, send a scanned image, or receive fax from your computer

The other two tabs are Device Settings for customizing your printer’s settings to your preference and Support in case should you need additional help navigating around or simply learning how to maximize your Brother printer to its full potential.

Technical glitches are quite common with each and every equipment/ Keeping this in mind, our Brother printer support team has come up with a few details to help you solve your Brother printer errors. In case, you are going through the same error with your Brother device, this article is definitely going to be helpful for you.

What Is The Problem With Brother Control Center?

Sometimes, you may receive an error that LAN cannot be found. There can be multiple reasons behind this problem. It can be due to corrupted registry keys and entries or it can also be some security issues. Gradually, this problem can affect other parts of your Brother printer as well. Fortunately, eliminating this error and making your Brother printer communicate with your system is pretty easy.

Solve Brother Printer Not Connected Control Center On Your Own

Here, our Brother Printer Support team has taken the initiative to fix Brother control center error with your Brother printer. Go through the steps that we have mentioned and apply them accordingly on your device. After that, check if the solutions are useful enough for you.

Clear All The Twunk, Twain And .mtx Files From The Temporary Folder

Press Windows key+R altogether and write %temp% on the dialog box and select OK. Navigate to all the twain, twunk and .mtx files and remove them from the temporary folder. After you delete all of them, restart your device and check if the error is still existing.

Check For The Network Connection

A poor network connection often fails to detect printing devices as well. Therefore, take a look at the network connection. For better result, configure your Brother printer to the peer-to-peer network environment. As soon as you do this, the client PC starts taking the responsibility of scanning and not the server PC. So the problem can easily be driven away by following this procedure.

Take A Look At The Software Firewall Settings

In order to make the scanning feature work properly, you need to configure your system firewall. Most of the time, the wrong firewall settings tend to create multiple problems during the scanning procedure. Therefore, you can reset the necessary features and check if your system is being compatible with your Brother printer.

Make Sure Your Router Is Communicating Via Bonjour

Ensure that your router allows the Bonjour communication. This will help your PC to detect the Brother printer easily via the Bonjour network. In case, you are unable to check that on your printing device, reach out to us for help. We will guide you with all the necessary steps in order to complete the task successfully.

Related Post: How to Install and Update Built-In Brother Printer Drivers through Wireless or USB Connection?

Steps to Solve Brother Printer not connected in the control center:

Try the following steps in order to remove the error from your control Centre. In most of the cases, the problem gets an instant fix by these following methods.

Step-1: Check your network connection

In order to use the network scanning feature, configure your Brother printer in the peer-to-peer network environment. Once you do this, the scanning feature works from the server PC and not from the client PCs.

Step-2: Confirm if your printer is available to print via network

If you find your Brother Printer not connecting to the network, try to continue your printing work via the network.

Step-3: Verify the Network Scan Settings

Go to the Device Selector and configure your scanner settings.

Step-4: Make Sure the Scanning Feature Works

To check if the scanning feature works properly, navigate to the Control Centre and select any file to verify.

Step-5: Configure the software firewall

You need to configure your software firewall in order to make the scanning feature work properly for you.

Step-6: Ensure your router can communicate on the network via Bonjour

Verify if your router allows Bonjour communication. In case you are unable to check that on your Brother printer, reach out to us and we will guide you along with some simple steps to resolve your issue.

Dial +1-800-910-1747 to Get in touch with us to avail instant support:

Brother Printer Support

Interact with our experts through a phone call, live chats and emails. We understand the importance of the printer in your life. Hence, we do not want you to suffer from any kind of printer glitches. Do not hesitate to call at our Brother Printer Support Phone Number USA:+1-800-910-1747| UK:++44-800-000-0000| AU:+61-180-000-0000. Stay in touch.

Reach Us For Further Assistance

Are you still stuck with the Brother control center error? Reach our Brother customer support to gain further information regarding the matter. Regardless of time, we can provide further assistance to you in order to help you get rid of the problem easily. So get in touch with us via any of these three ways.

Brother Helpline Number

You can give us a call at our Brother Printer Support Number and share your printing glitches with us.

Brother Live Chat Help

Similarly, our online chat portals are available 24*7 to assist you via live communication.

Email Helpdesk

On the other hand, you can also make a direct communication with us by dropping us an email. As soon as receiving your concern, we will get back to you soon.

10Jun/17
How To Fix Common Brother Printer Errors

How to fix brother printer errors E50, 51 and 52? +1-800-910-1747

Most of the Brother Printer errors come in alphanumeric codes. If users are aware of what these codes actually imply then, they can understand the root cause of it and solve those accordingly. If users are accounted with any kind of error messages in the Brother printer then, fix brother printer errors E50, 51 here are list of common Brother printer errors where users can have a close look into it and rectify them further. Let’s have an overview on how to fix common Brother printer errors with their solutions

Steps to fix brother printer errors E50, 51 and E52

  • Error E50

The error “E50 signifies malfunctioning of the printer’s fuser unit: a part of printer which gets warm up and binds the print on a paper immediately. This error further means either the temperature is too warm or it is not warm enough.

Solution:

Switch off the printer for at-least 5 minutes and then switch it back on again. Leave the printer unattended for a while (for 10 minutes) without directing any command. If this doesn’t work out then, the issue needs to replace the fuser unit immediately.

  • Error: E51

Among other common Brother printer errors, this signifies the laser unit mal-functioning issues. Laser unit tends to write information on the drum surface itself which further indicates a non-detection laser beam issue.

Solution:

Switch off the printer and then turn it on again. If again you are seeing this error then, the laser flap is defective and yes, its needs to be replaced.

Brother Printer Error: E52

The error clearly signifies that laser motor malfunctioning. Inside the laser unit, there is a spinning mirror and motor that drives it. Thus, this error defines that the motor is in faulty condition

Solution:

This error can also be resolved by powering off and turning it on again. Power off and on will help users to identify for any available errors. If it is there then, the laser needs replacement.

Brother Printer Error: E54

The error E-54 signifies malfunctioning of the printer’s main motor which holds all drives into the main gear train to run all printing functions accurately.

Solution:

Switch off the printer and turn it on again. If error continues to appear then, turn on the printer after removal of the toner is made.

Next, check for the proper working of the motor. If it does then, you need to buy another toner. But if the error persists then, then replacement of the main motor is necessary to have.

Brother Printer Error : E60

If users are encountered with this error then, the fan is completely in malfunctioning mode. There are generally four cooling fans in a printer and this error means a serious fault in one of them.

Solution:

Switch off the printer and turn it on again. In case error continues to persist then, it is advised to seek for immediate help from expert professionals to identify and replace the faulty fan properly.

Get in touch at Brother Printer Repair Service section for resolving any kind of printing issues. We are available all day long to assist users in resolving their problem by applying the best possible methods

27Feb/17
Error Code 36 in Brother Printer

How to Resolve Brother Printer Error Code 36?

Error Code 36 error in Brother Printer occurs due to technical trouble in the printer. This is a technical error that stops the printer while performing a printing job. It mostly appears in the brother printer. Brother Printer is believed to provide the best quality print but with a technical error, it is impossible. The technical error needs to be driven away or it can stop the printing. It is important to look after the maintenance of the printer or the quality can get damaged. Often brother printers may have problems that may occur in the form of multiple error messages. Another such message is the 36 warning of failure. This may result in the printer producing noise along with an error message “Unable to print, see User’s Guide for troubleshooting and general maintenance.” Your printing job may be terminated with this error message and is called your Brother Printer error 36.

Brother Printer Error Code 36

Print Unable 36 error occurs in Brother Printer due to the printer’s technical problem. This is a technical error that prevents the printer from doing a printing job. It appears mostly in the printer of the son. Brother Printer is thought to provide the highest print quality, but it is difficult with a technical error. It is necessary to drive away the technical error or it can stop the printing. It’s all there.

Generally Causes of the Print Unable 36 error occurs in Brother Printer:

The Print Unable 36 error is related to the HVPS PCB failure during standby. The best thing to do is to turn the machine off and unplug everything from the back. Let the machine sit 20 to 30 minutes then try again. Next would be to check all your connections. Go through the machine and make sure everything is plugged in the way it should be, especially the HVPS and make sure none of the Drum contacts are bent or out of place. Technical errors are common and can occur because of miscommunication and the printer’s lack of maintenance. Brother Printer happens with a lot of technical mistakes and one of them is Print Unable 36, which creates a lot of disruption. This technical error in the middle prevents the flow of printing. This happens because of malfunctions in the printing system that need to be reduced.

Resolve Error code 36 in Brother Printer :

  • Replace Damaged Parts
  • Remove Paper and Restart

Replace Damaged Parts

  • You can easily resolve the error code 36 by replacing the damaged parts in the Brother printer.
  • It is essential for you to replace the carriage unit, head, carriage PCB, and carriage motor, if you want to fix the error code 36.
  • Require the power supply PCB replacing if it is destroyed.

Remove Paper and Restart

  • After receiving the error code, you require to open the printer to inspect its inner components.
  • View various pieces of papers stuck inside the printer
  • open various printer covers such as front, paper tray, back and many more.
  • Fix the issue by removing these papers and the next step is to restart the printer.
  • Need to carefully read the installation manual of the printer and if necessary get help from a reliable and trusted technical support service provider.

Method 1:

  • Firstly, you will have to switch off the printing device.
  • Now, you will have to wait to let the printer turn off and become stable.
  • Let the printer device to rest for some time and cool off.
  • Turn on the printing device and wait until it reaches in its position.
  • When the printer gets into the ready position, you will have to try to take a test print by pressing the MENU, 6, 4 and Start.

Method 2:

  • Open up the printer access door when you turn off the printer completely.
  • After this, you will have to take off the drum and the toner cartridge from the printing device.
  • Now, you will have to close the printer access door.
  • Next, you will have to turn on the printing device and make it ready.
  • Check out for the technical error to get dismissed.
  • Once the error message gets disappeared you will have to turn off the printing device one more time.
  • Again, you will have to open up the printer access door.
  • Now, you will have to install the drum and the toner cartridge into its position.
  • You will have to remember to check out the drum and the toner cartridge as there can be damaged within the parts.
  • If any damage occurs within the parts, you will need to replace the parts with a new one immediately.
  • Once the parts get verified you can carry up to installation part.
  • Install the parts in a careful and then close the printer access door.
  • Now you will have to turn on the printing device and wait till the printer gets reached into its ready position.
  • Check out the technical error message and the absence of the message to appear, carry out a simple test.
  • Move into the User Settings List and then press on the MENU followed by pressing 6,4, and START.
  • Take a test print and make sure the error gets removed.

How To Fix Error Code 36 For Mac

Error Code 36 is somewhat of a rare error that some Mac users experience. It occurs when you are trying to copy a file which I will get into later, as well as show you how to fix it. So, if you are getting this error and have no idea what to do, or if you just want to learn for later, stay here because this article has everything you need to know about this error code.

What Causes error code 36?

Unfortunately, it’s not very clear exactly what causes this error to happen. I’m sure that if you had an extensive background in computer science you would be able to figure it out as it is a complicated issue that, most simply put, has to do with the directory of the files and their proper location.

Luckily for you, unlike many error codes, there’s no need to diagnosis what is causing it, as the solution is the same regardless. This is nice as it’s one less thing you have to worry about.

  1. he first thing that you need to do is open up the terminal on your Mac. if you’ve never heard of that or don’t know how to do it, fear not because it’s a really simple task to perform. We actually already have an article on it here that gives you step by step instructions.
  2. Once you have successfully opened the terminal, type dot_clean into the first line.
  3. Drag whatever folder is giving you issues to the terminal window.
  4. Once you drop the folder into the terminal, the path of the particular file will appear in the terminal windows at the end of the command. You can ignore this, as you probably won’t know what it means. It simply is just showing you the exact location of the folder. Just don’t be confused when you see a long line of coding language.
  5. All you need to do from here is click the Enter button on your keyboard and then close terminal.
  6. Test out to see if it corrected the issue by trying to copy the file to several locations on your Mac.

Why You Should Call Us?

Dial our toll-free Brother Printer Repair Service number +1-800-910-1747 for quick online assistance for resolving technical issues relating to the brother printers.