Tag Archives: Brother Printer customer support number

21Apr/17
How to solve Brother HL-6180DW Control Panel Key not responding Problem

How to solve Brother HL-6180DW Control Panel Key not responding Problem

Among many you came across Brother HL-6180DW control panel key not responding problem. Brother HL-6180DW is machine manufactured for all and wide range from small workgroups to medium organizations with printing features of all-in-one device. The machine was made for performing heavy duty printing as well. The device uses TN780 super high yield toner cartridges that print 12000 pages. With the same capacity, frequency and high –volume printing makes it more prone to mechanical and network issues arrival common. Get Brother Printer Technical Support for the mentioned issue and get resolved under the trained technicians:

Brother HL-6180DW Control Panel Key not responding fixed via following the below mentioned steps:

Step 1: Restart the device

Unplug the Brother HL-6180DW printer as disconnecting the device for some time say for approximately 30 seconds. Switch power back on.

Step 2:  Check for LCD display

Look for the display showing date, time along with other options. If yes proceed to next step

Step 3: In case LCD display is blank check for the power supply wire if it is properly connected or not. You might require plugging in directly on a wall socket using surge protector.

Step 4: Test for key response

Carry test for the Control panel key by pressing the dial pad and see if it responds accordingly on the LCD display

Step 5: If you receive no response from the control panel key on the LCD display, massage each key in circular motion which will force any possible stuck keys.

Step 6: Run the test again by pressing any key on the dial pad.

After the above steps performed and still keys are not working it is high time to get in touch with Brother Printer Customer Support Number USA @ +1-888-405-0090 (toll-free) for the proper guidance from the trained technicians.  As there may be chances after you have tried your best to solve the control panel key not responding issues. It is always better to get basic troubleshooting done under the proper guidance of the experts how actually work frequently with such issues. Get the problem resolved and enjoy your printing.

02Feb/17
Steps to reset the toner light on your Brother HL

Steps to reset Brother printer toner light HL2240?

The Brother HL-2240 is one of the most renowned as well as an attractive personal usage printer for any type of office work, with extremely a low price in the market which possesses various features such as fast speed, and more than acceptable output quality for wide category of business needs.

Easy Steps to reset the toner light on your Brother HL 2240

Below are few essential steps suggested by Brother Printer support number by which you can reset the toner light on your Brother HL 2240 model:

  • Turn on the Brother HL-2240 printer
  • Next, a user is required to open the intro cover of the printer
  • Press and hold Go, and turn power of the printer on. Try not to release the catch.
  • Leave the Go catch at the point when every one of the 3 lights turns on
  • Press the Go catch twice
  • The majority of the lights will power on automatically
  • With the majority of the lights on, press and discharge the Go catch 5 times
  • The Error light will begin squinting as this is normal
  • Close entryway and wait for a while. The printer will go through and make the sound it makes when you first cut it on. After that sound stops, your green Ready light will be on and strong.
  • You are finally prepared to print.

On the off chance that you are having an issue notwithstanding the Toner reset issue, Brother printer technical support number professionals recommend users to put your printer into upkeep mode by pressing the Go button in a wrong way or you are experiencing another issue, you can take a chance at resetting the printer to factory default settings.

  • To go ahead with the factory reset for the Brother HL-2240, you can refer to these guidelines:
  • Watch that the starting page of the printer is shut down.
  • Turn off the power switch on the correct side of the printer.
  • Press and hold the GO catch, and continue holding it down, as you turn on the power switch.
  • Keep the GO button pushed down until every one of the LEDs illuminate and the Ready LED switches off. Set free the GO switch. Ensure that every one of the LEDs switches off.
  • Press the GO switch for 10 times. The Ready LED will streak while the printer is reset. After the printer is reset the Ready LED will be switched on.

Our Brother  printer  customer support service is available for different group of customers using different devices worldwide that meet their daily demands for various working requirements. We believe in customer satisfaction and make sure that we have a track record of highest success rate to identify customer’s problem and solve them successfully. If you are looking for online assistance to resolve your problem, you can call us on our Toll-Free +1-888-405-0090 and we will get online tech support service with the best customer care support at reasonable charges.So, come and join us for tom experience our exceptional level printer solutions to your unexpected and critical issues.  And also our Canon printer technical support technicians are always ready to sort out each and every printer technical issues with instant solution. We also provide instant remote support for Epson Printer support services for your common printer errors such as Software installation issues, Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc.