Category Archives: Uncategorized

02Mar/21

Guide For Brother MFC 9325CW Wireless Setup

Brother MFC 9325CW Wireless Setup

It’s no secret that your Brother MFC 9325CW color all-in-one printer has a slew of cutting-edge features, including the ability to copy, print, fax, and scan documents. As a result, the following section will show you how to Do a Brother MFC 9325CW wireless Setup.

As Before connecting the Brother MFC 9325CW printer to wifi, make sure you have your Network Name (SSID/ESSID) and Network Key (Password/Security Key) memorized or written down so setting up a wireless connection can be as painless as possible.

Brother MFC 9325CW Wireless Setup

Steps To Do Brother MFC 9325CW Wifi Setup

Follow These Simple Steps To Connect Brother MFC 9325CW Printer To Wifi :-

Step 1

At first, you have to unpack the machine and remove the packing material from the box. Then, place the drum unit as well as the toner cartridges accordingly.

After that, load the paper into the Paper Tray. For that, first, take out the paper tray from the machine. Then, press the green paper guide and adjust the slider according to the paper size that you are using.

Ensure that the number of papers is below the maximum paper mark.

Step 2

For the next step, connect the AC power cable and telephone line to the machine and the computer. In case, a language selection page appears on the display, then select it.

Also, select the Correct Receive Mode. For that, press and hold the Menu, 0, 1 keys. Next, hold the upper or lower arrow to select the receive mode.

Afterward, press OK followed by Stop/ Exit button.

Step 3

If you have an eye problem, then adjust the LED brightness. Also, set the Station ID. To set the Station ID, press Menu, 0, 3 keys. Then, enter the fax number on the dial pad and press OK.

Step 4

After that, enter your telephone number and your name on the dial pad and hit the OK key. Also, set the Dial Prefix settings. Also, automatically set the Daylight Saving Time.

Step 5

Once you have successfully applied the above four steps, now it’s time to configure the wireless settings to communicate with the machine. You can use any of the given methods to complete the wireless setup.

  1. Use Printer Driver Software
  2. Use Printer’s Control Panel

We hope you have got all the necessary information regarding Brother MFC 9325CW Wifi Setup after going through the above discussion.

Related Blog : Brother MFC-9560CDW Wireless Setup

Contact Brother Printer Technical Support Team To Connect Brother MFC 9325CW Printer To Wifi

Printer Support

If you’ve exhausted all of your options and your printer is Not done with Brother MFC 9325CW Wireless Setup, contact our Brother Support Assistant. We have a highly qualified Brother printer tech support team available 24 hours a day to help. Our Brother customer service number allows you to contact us easily, and our experts will assist you in every way they can. If you want technical internet chat help, you can contact us via our online portal. You can also use our Brother Help ID to write us a letter to report the issue. Our experts will connect with you as soon as possible.

 

 

01Mar/21

Guide For Brother MFC-9560CDW Wireless Setup

Brother MFC-9560CDW Wireless Setup

It’s no secret that your Brother MFC 9340CDW All-in-One color machine has many wonderfully modern features such as the ability to copy, print, fax, and scan documents. Thus, you can learn how to perform a Brother MFC-9560CDW wireless setup in the following section. Brother MFC-9560CDW Wireless SetupBefore connecting the Brother MFC-9560CDW printer to wifi, make sure you have your Network Name (SSID/ESSID) and Network Key (Password/Security Key) memorized or written down so setting up a wireless connection can be as painless as possible.

Steps To Do Brother MFC-9560CDW Wifi Setup

Step 1. Press WiFi icon –This icon should appear on the upper right-hand corner of your touch screen. If you have this icon, press it and move to step 6.

If you don’t have this button, skip this step and move on to step 2.

Step 2. Press Settings icon – This is the tool icon on the upper right hand corner of your touch screen.

Step 3. Click “All Settings”.

Step 4. Choose “Network”.

Step 5. Choose “WLAN”.

Step 6. Press “Setup Wizard”

Step 7. Press “Yes” when “Enable WLAN?” is displayed on the touch screen.

Step 8. Choose Network Name (SSID)- Your machine will display a list of available network names in your area. If your network name is not displaying, check your wireless router/ access point to see if it is turned on and connected. If so, you may need to move your machine closer to the wireless router/ access point.

Step 9. You now have the following options – a. Enter Network Key. Enter the Network Key (Security Key/Password) of your wireless router/access point using the touch screen. Once you have entered your Network Key, press “OK” and then press “Yes” to apply the settings. Move to step 10.

b. No Network Key needed. If your Network Name is not encrypted with a password, you may skip this step and go to step 10.

c. WPS route. If your wireless router/ access point supports the WPS, press “Yes” when the machine asks if you would like to WPS. When the machine instructs you to begin WPS, press the WPS button on your wireless router/ access point. Then press “Next” using the touch screen.

Step 10. Now Connect Brother MFC-9560CDW Printer to WiFi – Give your machine some time as it attempts to make connection with your wireless router/ access point. Once connection is complete, you should see a small graphic of a 4-level wireless strength indicator

Printer Support

Brother MFC-9560CDW wireless setup is quite simple and an easy process. Thus, make sure that you have gone through the above instructions very carefully. Thereafter, try to print a test page to check whether you are able to print wirelessly or not.

Call Brother Printer Technical Support Team For Connect Brother MFC-9560CDW Printer To Wifi

If you’ve exhausted all of your options and you are still facing issue with Brother MFC-9560CDW Wifi Setup, contact our Brother Support Assistant. We have a highly qualified Brother printer tech support team available 24 hours a day to help. Our Brother customer service number allows you to contact us easily, and our experts will assist you in every way they can. If you want technical internet chat help, you can contact us via our online portal. You can also use our Brother Help ID to write us a letter to report the issue. Our experts will connect with you as soon as possible.

26Feb/21

Complete Guide For Brother MFC 8690DW Wireless Setup

Brother MFC 8690DW Wireless Setup

Looking help for Brother MFC 8690DW Wireless Setup & Wireless Network? Do not worry we are here to guide you to establish a connection between your printer to the wireless network. While using a device you may come across various issues but it is absolutely fine.Brother MFC 8690DW Wireless Setup

Steps To Do Brother MFC 8690DW Wifi Setup

For brother printer setup wifi first of all Configure the Wireless Setup Settings:

A user should only have to follow only these steps In order to do Brother MFC 8690DW Wifi Setup, which is mentioned below-

Step1- Add the AC power cord to the Brother machine.

Step2- Connect to an AC power outlet and then Turn on your Brother machine.

Step3- Don’t connect the USB cable yet.

Step4- After this Turn on the computer.

Step5- Then Put the supplied CD-ROM into the CD-ROM drive.

For a personal wireless network configuration:

Follow below steps to Setup brother printer wifi.

  1. Connect machine for a smaller wireless network.
  2. And then Check and record the recent wireless network settings below.
  3. Network Name (SSID: Service Set ID, ESSID: Extended Service Set ID)
  4. Network Key (Password, Security Key or Encryption Key, etc.)
  5. Brother machine only supports the use of the first WEP KEY.

After following the above steps you will be able to Connect Brother MFC 8690DW Printer To Wifi . Now, you have successfully installed the drivers on the device. Try to take a print out and check if you are able to use your printer wirelessly or not.

Your Brother MFC 8690DW Wireless Printer Setup Is Now Completed. Now Continue Printing With Your Installed Printer.

Related Blog: Brother MFC J615w Wireless Setup

Call Brother Printer Technical Expert For Connect Brother MFC 8690DW Printer To Wifi

If you have been tired of all the measures and the Brother MFC 8690DW Wireless Setup Is Not Done, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. Our Brother  support number allows you to reach us rapidly; our specialists will assist you in every manner possible. If you’re looking for technical internet chat support, you can simply use our internet portal to help you. You can also write us a letter to report the matter on our Brother Support ID. As quickly as possible, our specialists will communicate with you.

25Feb/21

Guide For Brother MFC J615W Wireless Setup

Brother MFC J615W Wireless Setup

Are you trying to establish a wireless connection between your printer and the router/access point? Brother MFC J615W wireless setup is very easy even if you are trying to install the printer for the first time. But, before you begin the setup, you must have the network name (SSID) and network key (password) with you. To achieve optimum printing results, make sure you have placed the printer within the range of the router.

If everything is set up accordingly, plug in the printer’s cord to a power source. Now, let’s move forward to the wireless setup for the printer.

Brother MFC J615W Wireless Setup

Steps To Do Brother MFC J615W Wifi Setup

A user should only have to follow only these steps In order to do Brother MFC J615W Wifi Setup, which are mentioned below-

Step1-Unpack the machine and check the components
  • Remove the protective tape and film covering the machine,
    and also from the LCD.
  • Remove the green protective part a by lifting the front of the machine and then
    pulling down on the packing part.
  • Remove the plastic bag b containing the ink cartridges from on top of the paper
    tray.
  • Make sure you have all components
Step2-Connect the power cord and telephone line
  • Connect the telephone line cord. Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack.
Step3- Install the ink cartridges
  • Make sure that the power is turned on.
  • The LCD shows No Ink Cartridge.
  • Open the ink cartridge
  • Remove the green protective part
  • Unpack the ink cartridge.
  • Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap .
  • Take care to match the color of the lever a with the cartridge.
  • Install each ink cartridge in the direction of the arrow on the label
Step4- Check the print quality
  • When the preparation process has finished, the LCD shows Set Paper and Press Start.Press Color Start.
  • Check the quality of the four color blocks a on thesheet. (black/yellow/cyan/magenta)
  • If all lines are clear and visible, press (Yes) on the dial pad to finish the quality check and go to step
  • If you can see missing short lines, press (No) on the dial pad and follow the steps on the LCD.

After following the above steps you will be able to Brother MFC J615W Wireless Printer Setup . Now, you have successfully installed the drivers on the device. Try to take a print out and check if you are able to use your printer wirelessly or not.

Your Brother MFC J615W Wireless Setup Is Now Completed. Now Continue Printing With Your Installed Printer.

Related Blog : Brother MFC 225CW Wireless Setup

Contact Brother Printer Technical Experts For Connect Brother MFC J615W Printer To Wifi

By now, you should be able to set up your Brother MFC J615W Wireless Printer Setup by following the instructions as provided. In case you are facing any issues, then you need to consult a professional technician to help you out with the installation process. They will either guide you through the entire process or do it for you.

24Feb/21

Steps To Do Brother MFC 225CW Wireless Setup

Brother MFC 225CW Wireless Setup

Brother MFC 225CW is one of the most purchased wireless printers. It is an all-in-one printer that has some unique features. Furthermore, it comes with a memory card slot so that you can print out photos without using a computer. With this printer, you can scan, copy, print and fax documents efficiently. You can also use the printer wirelessly. If you have recently bought this printer, then you need to know how to Do Brother MFC 225CW Wireless Printer Setup on a wireless network.

Brother MFC 225CW Wireless Setup

Steps To Do Brother MFC 225CW Wifi Setup

  1. To start, you must download the Brother MFC 225CW Wireless Setup driver. After that, select the system operation of your computer.
  2. Next, double-click the file you have downloaded.
  3. After that, choose Unzip
  4. Open that folder
  5. Then, double-click to the D_SETUP.exe. The installation is ready to start.
  6. You are going to see the instructions on the screen. Follow the steps to finish the installation.

After completing the configuration process, you need to now do the following steps to finish the installation process in Windows.

  1. Tap on the “Finish” button. This will restart the device. After restarting the device, check if you have logged in with administrative rights.
  2. Now, “check for the Firmware Updates” page will appear on the screen. Select the “firmware update settings” option and then tap on the “OK” button.

After following the above steps you will be able to Connect Brother MFC 225CW Printer To Wifi . Now, you have successfully installed the drivers on the device. Try to take a print out and check if you are able to use your printer wirelessly or not.

Your Brother MFC 225CW Wireless Setup Is Now Completed. Now Continue Printing With Your Installed Printer.

Related Blog : Brother DCP-7065DN Wireless Setup

Brother Printer Technical Support Team To Connect Brother MFC 225CW Printer To Wifi

By now, you should be able to set up your Brother MFC 225CW Wifi Setup by following the instructions as provided. In case you are facing any issues, then you need to consult a professional technician to help you out with the installation process. They will either guide you through the entire process or do it for you.

23Feb/21

Quick Guide To Do Brother DCP-7065DN Wireless Setup

Brother DCP-7065DN Wireless Setup

There are various features in Brother DCP-7065DN Printer that can save you time and money. The highlight is the capacity of wired networks so that you can conveniently share your printer. This machine’s speed is very rapid. Only a minute is required to produce 24 pages.

Brother DCP-7065DN Wifi SetupIn order to handle 1,200 pages, Brother DCP-7065DN Printer has an inbox toner. If you think you need more than that, the high capacity toner that supports 2,600 pages should go with you. The drum toner that offers 12,000 copies should also be replaced.

Key Points To Know Before Doing Brother DCP-7065DN Wifi Setup

Now, prior to beginning with the setup process, there are certain things that you must take into consideration. Without these, it will not be possible for you to perform the crucial Brother DCP-7065DN Wifi Setup :

  • You’ve got to check if your printer is on.
  • Go to the Pick Network menu > Reset Network > Press No.1.1 (to restart the printer)
  • The computer will then enter Default Printer Mode after that.
  • To continue the operation, you must select the Network > Setup Wizard option.
  • Then, choose SSID > and then choose NEW SSID (The machine will ask you to create a username and password). After that, press OK
  • Next, choose AD-HOC and connect it to the SSID you have created (The printer will print the printer status automatically. After that, wait for 1 to 5 minutes so the printer will connect via scan IP address)
  • Your installation of your Wi-Fi setup is complete. Try to connect your laptop or device to the SSID printer after that.

Let’s continue with the printer installation now that you are aware of the prerequisites before doing the wireless setup.

Go Ahead With Brother DCP-7065DN Wireless Printer Setup

Installing Brother DCP-7065DN Printer For Windows

  1. To start, you must download the Brother DCP-7065DN driver. After that, select the system operation of your computer.
  2. Next, double-click the file you have downloaded.
  3. After that, choose Unzip
  4. Open that folder
  5. Then, double-click to the D_SETUP.exe. The installation is ready to start.
  6. You are going to see the instructions on the screen. Follow the steps to finish the installation.
  7. Once the installation is complete, restart your computer. You can test your printer.

Installing Brother DCP-7065DN Printer For Mac

  1. You must download the Brother DCP-7065DN Wifi Setup driver. After that, choose the operating system for your computer.
  2. Next, double-click to the “xxxxxxxx.dmg” you have downloaded.
  3. After that, double-click on “xxxxxxxxx.pkg.” That’s the kit for the installer.
  4. So that you can complete the installation, you have to obey the instructions.
  5. Please restart the machine once you have completed the installation. You can test your printer after that.

Your Brother DCP-7065DN Wireless Setup Is Now Completed. Now Continue Printing With Your Installed Printer.

Related Blog : Brother mfc j435w wireless setup

Call Brother Printer Technical Experts For Brother Printer Setup

Printer Support

If you have been tired of all the measures and the Brother DCP-7065DN Wireless Printer Setup Is Not Done, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. You can reach us easily with our Brother Support Number; our specialists will assist you in every way possible. You can simply use our internet portal to help you if you are looking for professional internet chat support. You may also write us a letter on our Brother Help ID reporting the matter. Our specialists can connect with you as soon as possible.

22Feb/21

Guide For Brother mfc j435w wireless Printer setup

Brother mfc j435w wireless setup

Brother Wireless Printers enables the users to use its features in wireless mode when connected to the computer. If you are looking for instructions to do the Brother MFC J435W wireless setup, you are at the right place.

An simple procedure is to configure the Brother MFC-J435W on the wireless network. But, before continuing with the configuration, you have to perform some tasks. Here, three strategies for doing the setup are going to be dealt with. You can, however, select any of them according to your convenience.

Brother mfc j435w wireless setup

Things To Check Before Doing Brother mfc j435w wifi setup

You’ll need to know all of your wireless settings before you can connect the Brother printer to your wifi network. Before getting started, the things you will need to know are:

  • Network Name (also known as “SSID” or “ESSID”)
  • Network Password (also known as “Network Key”, “Security Key”, or “Encryption Key”)

The first place you can look is on the side of your router if you’re unsure how to find this stuff. These specifics will be on a sticker on your router in most instances. If not, search the documentation of your router to see how to access this information through the browser.

You can start connecting your Brother printer to your wireless network once you have your network details on hand.

Steps To Connect Brother mfc j435w wireless Printer To Wifi

Solution 1: Wireless Setup Using a USB Cable and CD-ROM

Make sure that you have the CD-ROM that comes with the kit for the printer. You’ll still need a USB cable before the wireless link is created. However, you have to instal the printer driver on your computer before going any further.

Put the CD-ROM into the disc drive and wait for a while before it is detected by Windows. Follow the on-screen instructions to instal the driver if the OS prompts you. You can download the driver from the official Brother website if you don’t have a CD-ROM. Open the Brother screen after installation and follow the below-mentioned steps.

  • Click on “Install MFL-Pro Suite” under the “Top Menu” on the Brother screen. Tap “Yes” when it prompts.
  • Choose ‘Link to Wireless Network’ and tap ‘Next’. Choose “Change port firewall settings to allow network connection and proceed with the installation.” (Recommended)». Click the ‘Next’ button.
  • Afterwards, pick “Directly use your computer or control panel” and press Next. Pick “Use a USB cable temporarily (recommended)” and tap “Next.”
  • Follow the on-screen instructions until you reach the “Available Wireless Networks” window. Select the particular network to which you want to connect the printer and press “Next”.
  • Type the network key (password) and click “Next”.

Note: If you don’t find your network name in the list, you can click on the “Advanced” button. Thereafter, follow the on-screen instructions to add a network manually.

You can now disconnect the USB cable as hopefully, the Brother MFC-J435W wifi setup is complete.

Solution 2: Use WPS or AOSS Mode

Only if your router or access point has the WPS or AOSS button can you apply this form. Now, make sure the printer is located within the router’s range. Click the Menu icon, too, and go to Network > WPS/AOSS. After selecting each choice, press OK.

Then the wireless configuration wizard appears on the monitor. Click the “WPS/ AOSS” button on the router whenever the LCD shows Start WPS or AOSS. After that, click OK and your printer will connect within a few minutes to the wireless network.

The relation status can be displayed on the control panel of the printer and a WLAN report will be printed automatically.

We hope you have got all the necessary information regarding Brother MFC-J435W wireless setup after going through the above discussion.

Related Blog: Brother dcp-t510w Wireless Setup

Call Brother Printer Technical Experts For Brother Printer Setup

If you have been tired of all the measures and the Brother mfc j435w wireless Printer setup Is Not Done, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. You can reach us easily with our Brother Support Number; our specialists will assist you in every way possible. You can simply use our internet portal to help you if you are looking for professional internet chat support. You may also write us a letter on our Brother Help ID reporting the matter. Our specialists can connect with you as soon as possible.

18Feb/21

How To Fix Brother Print Unable 04 Error?

Brother Print Unable 04

Looking For The Solution Of Brother print Unable 04 So you are at right place, Brother printers are very renowned for their user-friendliness and best features for class printing. There are occasions, however, when users face many problems when using their printers, such as an error in printer 04 or some other code. Typically, these error codes signify different printer problems that might have occurred on the computer.

Brother Print Unable 04

So what is Brother Error Code 04 and why does it appear on your printer’s screen? Well, in simple words, the error states that your Brother Printer device is unable to print due to various technical or mechanical malfunctions that have occurred on the device.

So what to do with the Brother Printer to solve such a problem? To learn about some of the easy fixes that should help you fix printer error 04 on a Brother computer, read this article further.

How To Fix Printer Error 04 On Brother Printer?

Solution1: Reset the Brother Printer Device

  • Turn your printer off and cut all the wires and cables from it.
  • Wait 10-15 seconds and then plug all the wires and cables into your printer.
  • Next, switch the computer on to see if the device shows the date and time.

Solution2: Update the driver of your Brother Printer

  • Head to your web browser’s Brother Printer Support webpage and pick the Support & Download tab.
  • Click the Select Product connection, and then enter the printer model number.
  • Next, follow the instructions on the screen to download your device’s drivers and then instal them.

Manually Clean Your Brother Printer

Manually cleaning your printer can also sometimes help you in fixing Brother Print Unable 04. However, you’ll need to carefully remove all the components of your printer such as print-head, ink cartridges, paper tray and other things. Always use a damp cloth to clear the dust from the components of the printer and then use a dry cloth to remove any wet areas in your printer. In addition, if they are still intact, also check your ink cartridges and will print as long as they can, if not then simply substitute them with the new ones Now Brother Printer Error Code 04 May Is No More.

Related Blog : Brother Printer Not Printing Black

Contact Brother Printer Technicals To Fix Brother Print Unable 02 Error

If you have been tired of all the measures and the printer is still Facing Brother Error Code 04, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. You can reach us easily with our Brother Support Number; our specialists will assist you in every way possible. You can simply use our internet portal to help you if you are looking for professional internet chat support. You may also write us a letter on our Brother Help ID reporting the matter. Our specialists can connect with you as soon as possible.

 

17Feb/21

How To Do Brother dcp-t510w Wireless Setup

Brother dcp-t510w Wireless Setup

Set the Brother dcp-t510w Wireless Setup, from the Devices and Printers section of the Control Panel, to match those of the badge pass template you set up.

Your Setup should only take a couple of minutes. After doing this you should refer back to the Getting Started Printing Guide for the next steps.

Brother dcp-t510w Wireless Setup

Before you start To Connect Brother dcp-t510w Printer To Wifi

Install your Brother dcp-t510w Printer on the Wi-Fi network or via hardwire by following the install guide that came with the printer. You can download the latest drivers from the Brother website.

If you are installing it for an iPad, this must be done on the same Wi-Fi network as the iPad Kiosk will connect to. We also support Direct Brother Printing with the IP Address or Bluetooth should you have restrictions in place.

Prepare the printer For Brother dcp-t510w Wifi Setup

Follow these instructions to prepare the printer for Brother dcp-t510w Wireless Setup.

  1. Remove your printer from the packaging and remove all tape and protective material. Also, make sure you remove any protective material from the inside of the printer. It’s often there to make sure nothing inside the printer breaks during transport. Check the manual to be sure you don’t miss any material.
  2. Insert the plug into the socket to provide the printer with power and then switch on the printer.
  3. Choose the correct language on the screen.
  4. Place some paper in the paper tray. You take the drawer out completely, remove the lid, and place the paper. Replace the lid and put the paper tray back in the printer.

Step 1: Install cartridges

Open the cover on the front of your printer and remove the orange protective material. Remove the packaging from the cartridges and place them carefully. Make sure you click them properly, Otherwise the printer will display an error message. The printer will now install itself and make a test print. Press OK if no dotted lines are missing Now You are have started towards Brother dcp-t510w Wifi Setup.

Step 2: download software

You have now connected your printer. In this step, we’ll make sure your computer can control the printer. For this, we install software from Brother. Go to your browser: http://support.brother.com/g/b/countrytop.aspx?c=en&lang=en

  1. Click on downloads.
  2. Choose the right product category for your printer.
  3. Select the product series of your printer.
  4. Select the operating system of your laptop or PC.
  5. Download the ‘Complete package of drivers & software’ and accept the agreement.

Step 3: Install the software

  1. Open the installation program.
  2. Select the language in which you want to run the installation software.
  3. Follow the steps of the installation wizard.

Step 4: Choose a connection method

4.1: Connect to the software

The easiest way is to connect your printer to WiFi using Brother software that you’ve installed on your PC. In the Brother software, you just installed select WiFi Connection or Wireless connection. Follow the instructions in the following steps. The software sets the connection automatically, after which your printer is connected to your WiFi network.

Step 4.2: Connect via your printer

The menu is slightly different per Brother printer, but with most printers, you choose the following terms in the menu:

  1. Go to the WiFi icon on your printer.
  2. Press Change settings.
  3. Select the installation wizard.
  4. Select the name of your network. This is also called SSID.
  5. Enter the password of your WiFi network.
  6. Press the OK button with the arrow.

Start printing With Your Brother dcp-t510w Wireless Printer

Your printer connects to WiFi and the installation is ready. You can start printing…

Related Blog : Brother mfc l2750dw xl setup

Contact Brother Printer Technical For Complete Installation

If you have been tired of all the measures and the printer is still not Connected or Brother dcp-t510w Wireless Setup Is Incomplete, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. Our Brother support number allows you to reach us rapidly; our specialists will assist you in every manner possible. If you’re looking for technical internet chat support, you can simply use our internet portal to help you. You can also write us a letter to report the matter on our Brother Support ID. As quickly as possible, our specialists will communicate with you.

16Feb/21

Guide For Brother dcp-l2550dw Wireless Setup ?

Brother dcp-l2550dw Wireless Printer Setup

Looking For Brother dcp-l2550dw Wireless Setup? As you’ve just bought a new Brother dcp-l2550dw Printer and now you want to connect it to your wi-fi network. Don’t fret, we’ve put together a simple tutorial on how to connect Brother printer to wifi to make your life a little easier. No matter what type of computer you use, you should be able to set your brother machine up on your wireless network by the end of the instructions.

Brother dcp-l2550dw Wireless Setup

Know About Your Brother dcp-l2550dw Wifi Setup

Before you can connect a Brother printer to your wifi network, you’ll need to know all of your wireless settings. The things you will need to know before getting started are:

  • Network Name (also known as “SSID” or “ESSID”)
  • Network Password (also known as “Network Key”, “Security Key”, or “Encryption Key”)

If you’re unsure how to find this information, the first place you should look is on the side of your router. In most cases, these details will be on a sticker on your router. If not there, check your router’s documentation for how to get to this information via a browser.

Once you have your network information handy, you can begin connecting your Brother printer to your wireless network.

Direct Settings For Brother dcp-l2550dw Wireless Setup 

The first option you can try is called a wireless direct setup. Wireless Direct lets you connect your printer to your computer or smartphone directly without a Wi-Fi access point or router. In this case, the Brother printer essentially serves as a Wi-Fi access point. To use this method follow these steps:

For Windows PCs

  1. Confirm the Wireless Direct settings of the printer.
  2. Connect the printer and computer with a USB cable.
  3. Start the Printer Setting Tool on your computer, and click the “Communication Settings” button.
  4. Confirm that “Wireless Direct” is selected for “Selected Interface” in the “General” tab.
  5. Press and hold the Wi-Fi button on your printer for one second to turn the Wi-Fi function on.
  6. Use your computer or mobile device to select the SSID of your printer and enter the password.
  7. When the connection is established, the Wi-Fi (Wi-Fi) indicator lights in blue.

 For Mac

  1. Confirm the Wireless Direct settings of the printer.
  2. Connect the printer and computer with a USB cable.
  3. Start the Printer Setting Tool on your computer
  4. Confirm that “WirelessDirect” is set to “On” in the “Wireless LAN” tab
  5. Press and hold the Wi-Fi button on your printer for one second to turn the Wi-Fi function on.
  6. Use your computer or mobile device to select the SSID of your printer and enter the password.
  7. When the connection is established, the Wi-Fi (Wi-Fi) indicator lights in blue.

Be careful not to hold the Wi-Fi button for too long. If you hold it for five seconds or more, the printer will enter the WPS mode and any connection using Wireless Direct will fail.

You should also know that you can’t connect to the Internet via Wi-Fi while using Wireless Direct. To use the Internet, use a wired connection (when a computer is connected), or connect using Infrastructure Mode.

Related Blog : Machine error 46

Call Brother Printer Technicals For Setting Up Your Wireless Printer

If you have been tired of all the measures and the printer is still in error condition, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. Our Brother  support number allows you to reach us rapidly; our specialists will assist you in every manner possible. If you’re looking for technical internet chat support, you can simply use our internet portal to help you. You can also write us a letter to report the matter on our Brother Support ID. As quickly as possible, our specialists will communicate with you.