Category Archives: Fix Brother Printer Error 30 33 34 or 35

20Jun/18

How to Fix Brother Printer Error 30 33 34 or 35

Brother printers are famous for their quality and best specifications that make the task of printing easier than ever. However, they also bring some annoying technical hazards due to some unavoidable mechanical malfunctions. so users may face some common issues or errors with this service. In all of these, today we will discuss the brother printer error code 30. So, if you are also facing this error on your printer then you can get a perfect resolution by following some simple steps which we are given in this article.One such trouble is error codes and the need to Fix brother printer error 30,33, 34 or 35 will positively solve oncoming printing problems.

Know about the causes responsible for Brother Printer Error 30:-

Following may be the reasons if your Brother printer is showing this error:-

  • f print head carriage is unable to return to its position or falling to the far right of the unit.
  • When both springs positioned on each side of the carriage are not fitting properly.
  • When the cartridge covers are not locked appropriately on their place.

Following are the measures to fix Brother Printer Error Code 30:

You can easily resolve this Brother Printer error code 30 by pursuing below mentioned steps. You need to follow each and every step for quick solution of this error.

Solution 1:

  • Firstly, look at the left and right side of the machine to open the cover of the scanner by utilizing plastic tabs.
  • Shift the print head to the middle side
  • Make sure no piece of staple, paper or any paper clip should be there

If the error still persists, then apply next solution.

Solution 2:

  • Again, hold the scanner cover by using the plastic tabs of the cover until it locks properly into the open position.
  • To make sure that you have clean the entire encoder strip, simply slide the print head over the right side under the printer cover.
  • To clean the encoder strip, use a lint free cloth, grab the strip on both sides firmly and scrub the cloth from one end of the strip to another at least three times.

If you find the error again, then you can need to move towards the next solution.

Solution 3:

  • Check for the position of encoder strip whether it is at fine or out of place.
  • Now, open the printer cover and reinsert the encoder strip.
  • At last, restart your printer and take a test print to ensure printing quality.

Fix Brother Printer Error 30 33 34 or 35:

There are various ways to handle this error. But complexity may give you stress and anxiety. So it is better to stick to the blog to avoid unwanted hassles. Else Brother  Customer Support Service is a better idea to deal with such situations.

Users often face trouble in accessing their printer service smoothly due to the varied errors and display messages that come up from every now and then. Here are a few things you need to check to make sure you can avoid the error codes-

  • The spring carriages located at each side are out of their place can be a cause for such error codes.
  • The front part of the print carriage is facing problem in going back to the home position that is situated to the rightmost part of the unit.
  • Unlocked covers of the cartridge that are not secured to be kept at the place and needs a replacement.

All these troubles can indicate errors in making you get a trouble-free printing experience. In order to correct the issues, you may take help from the following instructions-

  • Open the control panel and press INK button
  • Press 2 on the dial pad and open the cover on the prompted display
  • Open the scanner cover located under the control panel by pulling out the lever. This will shift the carriage to the left side and replace ink.
  • Remove all the ink cartridge from the system by pressing down the cartridge cover and move the springs into original position.
  • Close the cartridge cover and verify if each machine part is into its right section before calling an expert to help you with the errors.

Grab 24*7 Brother Printer Tech Support Number for Instantaneous Solution:

If the Error 30,33,34 or 35  issue still recurs, Call our Brother Printer Tech Support Number +1-844-997-0355. Here we offer a hand to hand information to get the issue resolved. Other than that, our support team will also guide you which solution will be better. Call now, avail this opportunity to make you free from stress.