How To Do Brother dcp-t510w Wireless Setup

Brother dcp-t510w Wireless Setup

Set the Brother dcp-t510w Wireless Setup, from the Devices and Printers section of the Control Panel, to match those of the badge pass template you set up.

Your Setup should only take a couple of minutes. After doing this you should refer back to the Getting Started Printing Guide for the next steps.

Brother dcp-t510w Wireless Setup

Before you start To Connect Brother dcp-t510w Printer To Wifi

Install your Brother dcp-t510w Printer on the Wi-Fi network or via hardwire by following the install guide that came with the printer. You can download the latest drivers from the Brother website.

If you are installing it for an iPad, this must be done on the same Wi-Fi network as the iPad Kiosk will connect to. We also support Direct Brother Printing with the IP Address or Bluetooth should you have restrictions in place.

Prepare the printer For Brother dcp-t510w Wifi Setup

Follow these instructions to prepare the printer for Brother dcp-t510w Wireless Setup.

  1. Remove your printer from the packaging and remove all tape and protective material. Also, make sure you remove any protective material from the inside of the printer. It’s often there to make sure nothing inside the printer breaks during transport. Check the manual to be sure you don’t miss any material.
  2. Insert the plug into the socket to provide the printer with power and then switch on the printer.
  3. Choose the correct language on the screen.
  4. Place some paper in the paper tray. You take the drawer out completely, remove the lid, and place the paper. Replace the lid and put the paper tray back in the printer.

Step 1: Install cartridges

Open the cover on the front of your printer and remove the orange protective material. Remove the packaging from the cartridges and place them carefully. Make sure you click them properly, Otherwise the printer will display an error message. The printer will now install itself and make a test print. Press OK if no dotted lines are missing Now You are have started towards Brother dcp-t510w Wifi Setup.

Step 2: download software

You have now connected your printer. In this step, we’ll make sure your computer can control the printer. For this, we install software from Brother. Go to your browser: http://support.brother.com/g/b/countrytop.aspx?c=en&lang=en

  1. Click on downloads.
  2. Choose the right product category for your printer.
  3. Select the product series of your printer.
  4. Select the operating system of your laptop or PC.
  5. Download the ‘Complete package of drivers & software’ and accept the agreement.

Step 3: Install the software

  1. Open the installation program.
  2. Select the language in which you want to run the installation software.
  3. Follow the steps of the installation wizard.

Step 4: Choose a connection method

4.1: Connect to the software

The easiest way is to connect your printer to WiFi using Brother software that you’ve installed on your PC. In the Brother software, you just installed select WiFi Connection or Wireless connection. Follow the instructions in the following steps. The software sets the connection automatically, after which your printer is connected to your WiFi network.

Step 4.2: Connect via your printer

The menu is slightly different per Brother printer, but with most printers, you choose the following terms in the menu:

  1. Go to the WiFi icon on your printer.
  2. Press Change settings.
  3. Select the installation wizard.
  4. Select the name of your network. This is also called SSID.
  5. Enter the password of your WiFi network.
  6. Press the OK button with the arrow.

Start printing With Your Brother dcp-t510w Wireless Printer

Your printer connects to WiFi and the installation is ready. You can start printing…

Related Blog : Brother mfc l2750dw xl setup

Contact Brother Printer Technical For Complete Installation

If you have been tired of all the measures and the printer is still not Connected or Brother dcp-t510w Wireless Setup Is Incomplete, contact our Brother Support Assistant. To assist, we have an extremely skilled Brother printer tech support team accessible 24 hours a day. Our Brother support number allows you to reach us rapidly; our specialists will assist you in every manner possible. If you’re looking for technical internet chat support, you can simply use our internet portal to help you. You can also write us a letter to report the matter on our Brother Support ID. As quickly as possible, our specialists will communicate with you.

Call Now ButtonCall Now
error: Content is protected !!